Two Stage Regulator B6

1. SCOPE

The Regulator B6 is a two stage regulator for medium inlet pressure with high precision class and comply with EN 334 / EN88 specifications (Compliance according to PED 97/23/CE art. 3.3).

2. DESCRIPTION

Design for use on Domestic or Industrial applications on Natural Gas used in cabinets, building gas line with or without meter for domestic or commercial applications.

3. TECHNICAL DATA

Body and cover : Die Cast Aluminum Alloy
Internal parts : Nitrile NBR, Stainless Steel, Brass, Aluminium

Upstream pressure	Downstream pressure	Flow rate
bar	mbar	B6
0,5 to 5	21 Mbar pre-setted	6 Nm3/h NG 3,8 Nm3/h Propane or 7,6 kg/h Propane

SPECIFICATIONS

Working temperature: Standard use -20°C to +60°C
Nominal Capacity up to 7.2 M3/Hr of Natural Gas at 0.5 Bar inlet pressure
Inlet connection: ½’’ Loose Nut
Outlet connection: ¾’’Loose Nut

OTHERS

Maximum inlet pressure up to 6 Bar
It can be mounted in either position Horizontally or Vertically
Other Inlet and Outlet connections on request
Adjustable outlet pressure on request

Single Stage Regulator M2.5

The Domestic Gas Regulator M2.5 is a low inlet pressure regulator popularly known as meter regulator and is used for supplying Natural Gas/LPG for residential household/domestic purpese whlch comply wlth EN 88-1/PRS3. The M2.5 regulator is a spring loaded direct-operated regulator including an excess flow protection which closes in case of high flow or low inlet pressure, and reverts automatically to open position when conditions are back to normal.

2. DESCRIPTION

The M2.5 regulator is designed for low pressure domestic applications with inlet pressure up to 200 mBar, and is avallable with integral under pressure cut-off (UPCO). lt can be mounted ln either a vertical or horizontal orientation.
The M2.5 regulator is installed directly on te hub of a gas meter.

3. TECHNICAL DATA

Body & Cover: Die Cast Aluminum
Internal Parts: Nitrile NBR, Brass, Stainless Steel

Upstream pressure	Downstream pressure
bar	mbar
0,2	15 to 25

SPECIFICATIONS

Working temperature:
Standard use: -20°C to +60°C
Inlet & Outlet Connection: 3/4” BSP F

Two Stage Regulator B6

1. SCOPE

2. DESCRIPTION

3. TECHNICAL DATA

SPECIFICATIONS

OTHERS

Single Stage Regulator M2.5

1. SCOPE

2. DESCRIPTION

3. TECHNICAL DATA

SPECIFICATIONS

About us

Our Contacts

Photos Stream